Fluoropolymers, or fluorine-containing compounds, and tris(nonylphenol) phosphite (TNPP) CAS# 26523-78-4 are not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for their presence, based on product composition knowledge these substances are not expected to be present. However, the fact that these substances are not intentionally used by ExxonMobil in this product does not exclude that trace levels of these substances may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.
This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). |
Film (0.8 mil / 20 micron) made from Enable™ 1617PA on a 7-layer cast film line with 4 extruders (2 ext of 2 inch diameter, 2 ext of 75 mm diameter), melt temperatures between 525 - 540°F (274 - 282°C), FLH at 3 o’clock drive side, a chill roll temperature of 70°F (21°C), and 750 fpm (229 m/min) line speed. |